Eight auto
Automatic drip irrigation system "Dachnaya Teplitsya" DG25hb-AQ », is designed to organize irrigation in summer cottages and garden greenhouses up to 4 x 6 meters in size.
Description
The system is designed for a seasonal unheated greenhouse or for year-round use in a greenhouse with heating with an area of up to 30 m².
The system consists of a filter with a mesh or disc filter element (at the customer's choice), a manual control valve, an automatic control controller, a distribution tube with a diameter of 8 mm, a drip tube with a diameter of 8 mm and a set of mounting fittings.
A source of technical or drinking water is used for irrigation. Water for irrigation is purified by a mesh or disc filter (customer's choice), included in the kit.
Material of the filter element:
mesh filter - polyester,
disc filter - polypropylene.
If the filter element gets dirty, it does not need to be replaced. To clean it, rinse it under running water with a soft brush.
A drip tube with a diameter of 8 mm with built-in emitters (the distance between emitters is 30 cm or 20 cm) is used as a working element for irrigation, the water flow from 1 emitter is 1.2 l/h.
The system is controlled by a controller that provides a cyclic irrigation mode according to a program set by the user, the duration of each irrigation is from 1 sec.
The kit includes a connector with a diameter of ¾ inches with an internal thread for connecting the system to a water supply source, as well as a quick-release fitting that allows you to connect the distribution tube in one movement. This enables simple and quick installation and dismantling of the system if necessary.
To ensure the functioning of the system, it is necessary to provide a water pressure at the inlet to the system of at least 0.9 bar.
Installation diagram
From the water supply source, water is supplied through a PE pipe with a diameter of 8 mm to 4 drip tubes laid along the beds with plants.
The system is controlled by a controller.
Watering is carried out automatically according to the program you set.
Installation of the system is very simple and takes no more than half an hour time.
When assembling the system, it is necessary to ensure that the direction of the water flow corresponds to the arrows indicated on the filter and the electromagnetic valve.
Specification
| No. |
Name |
Quantity, pcs. |
| 1 |
Connector 3/4F x 16 mm |
1 |
| 2 |
Tap F x 16 mm |
1 |
| 3 |
Nipple ¾ M |
1 |
| 4 |
Solenoid valve ¾F with controller Geva 75W |
1 |
| 5 |
Mesh/disc filter ¾'' |
1 |
| 6 |
Quick connector 3/4F x 8 mm |
1 |
| 7 |
Tee 8 mm |
3 |
| 8 |
Elbow 8 mm |
2 |
| 9 |
Drip tube 8 mm, 25 m |
1 |
| 10 |
Tube 8 mm, 5 m |
1 |
All components are made in Israel.
